Home > Products > Silicone sealant

Name:
Top grade acid silicone sealant 300ml
Item number:
Silicone sealant
Catalog:
MPH101
Description:

Specifiction:300ml/pc,24/ctn

Meas:30*20*24.5cm

 

Feature:
This product is neutrality solidifies, has the characteristics of
high viscosity, the medium module, the high flexibility high strength, outstanding aging resistance, performance fine. There are colors of transparent, gray, porcelain white.

 


Main Composition:
α,ω-Dihydroxyl Methyl Silicone

 

Scope Of Application:
This product can be widely used, available in bonding of glass, rubber, lumber, ceramics, metal and textile fiber surface; This product not suitable to use in seep out the fat, the plasticizer or the solvent material surface; in the airtight place and the rime not , successive years immerses or all year long the moist place.

 

Using Method:
1.Clean the surface to get rid of the rust, oil, or any dirty.
2.Cut the cap point, twists the cap mouth, cut at 45 degree angle bevelling according to need.
3.In order to get the smooth glue, hold the bottle at 45 degree angle, squeeze the glue through cap mouth.
4.If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
5.After completely solidify, amend the glue by knife.

 

Warning:
1、This product will release a few acetic acid in the solidification process, the working conditions should maintain ventilate.
2、Do not put within kid’s reach, non-toxic after solidifies completely, avoid eye contact before solidification, if touches the eye carelessly, use massive water to wash, if serious go to see a doctor.
3、When operation, must hold the glue steadily, cannot separate, guards against mixes in the air and form bubble , affects the seal effect.
4、After operation, take off the cap mouth immediately, close the packing cover tightly to prevent the moisture enter and cause solidification. Wipe off the glue left at glue mouth.
5、This product should be operated at temperature 5-40℃,relative humidity 40-80%

Storage And Packing:
1.The product is nonflammable. Keep dry and shade, air tight during storage. The shelf life is nine months.
2.Packing specification: 85g in soft plastic tube

 

Technical Feature:

No.

Item

Parameter

Top grade silicone

sealant

Medium grade

silicone sealant

1

Appearance

Exquisite well-proportioned cream, no no agglomeration, no gelling. no bubble, hard dispersing

2

Prolapse

distance

vertical , mm

≤ 3

Aclinic

No distortion

3

Density

0.98-1.03

1.34-1.42

4

Extrusion , ml/min

≥ 400

≥ 400

5

Surface setting Time,mm

5-20

5-20

6

Shao's Hardness

20-40

20-40

7

elongation Mode /MPa

2 3 ℃ Standard

≥ 0.4

/

Under water

≥ 0.4

/

Water-Ultraviolet radiation

≥ 0.4

/

8

Bonding

destroy area %

2 3 ℃

Standard

≤ 5

≤ 10

Under water

≤ 5

/

Water-Ultraviolet radiation

≤ 5

/

9

Elastic recover rate%

≥ 90

≥ 80

10

Extend bonding rate

60% damage

60% damage

11

Setting time mm/24h

3-8