Home > Products > Auto motive epoxy adhesive

Name:
8 Minutes Rapid Clear Epoxy Adhesive
Item number:
Auto motive epoxy adhesive
Catalog:
MPA103
Description:

Specifiction:28g/set,12sets/inner,12inners/ctn

Meas:41.6*29*48.7cm

Feature:
8 Minutes Rapid Clear Epoxy Adhesive is based on the room temperature, having the features of:
(1) solidifying within 10 minutes,
(2) suitable for small parts and structural strength
(3) can be used after three hours
(4) quick set and high adhesive performance
(5) can be lacquered and waxed
(6) not suitable for the joint of shaking place, joint layer is fragile

Main Component:
A component is the modified Epoxy Resin, B component is modified amine hardener

Scope Of Application:
The products of this series are widely used for bonding iron, casting iron, steel, aluminum, glass etc. Mainly used in material cementation, the seal and patching of architecture material, the automobile spare part, the electronic component assembly, the gem jade carving, the handicraft and so on.

Using Method:
1.The surface should be clean and dry, without oil or wax
2.Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1.2:1). cover the surface with glue based on the mixing of the two components evenly,
3.Press it according to the actual condition. it could achieve the using intensity after the solidifying for three hours during the normal temperature, it is suggested to operate at above 10℃.

Warning:
1.It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.
2.Tighten the caps after usage .Do not mix the cap of part A and B.
3.Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.
4.Avoid touching with the eyes and skin directly. If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.
5.Take strict precautions against touching by the kids and entering into the mouth.

Storage And Packing:
1. Stock the products with air-tight seal in the environment of shade and dry. The shelf life is one year. It is available to use based on passing of the test if being beyond the shelf life.
2. Preserve and transport as non dangerous products.
3. Packing specification: 28g/card, in tube.

Technical Feature:

Name Of Product

Item Code

Component Rate(A:B=1:1)

Appearance

Setting time
(25℃,mix glue 3-8g)

Tensile shear Strength
(25℃*48h,Steel—Steel)

8 Minutes Rapid Clear Epoxy Adhesive

SK-112

A : B=1-1.2 : 1

 Component A and B are clear or light yellow mucus

5-10 Mins

≥ 5MPa