Home > Notre information
Surface treatment : chemical treatment and physical treatment on the surface of materials which will be bonded for better bonding performance.
Degrease: clean the grease contamination adherends' surface, usually use lye or organic solvent.
Burnish: a physical treatment on the surface by sand brush or wire brush.
Chemical treatment: put the adherend in to lye or acid to make surface to be activation or passivation according to the surface materials.
Spray finishing: Spray glue to adherend's surface by air sprayer pistol.
Brushing: Spread glue to adherend's surface by manual usually use brushes.
Dipping: put the adherends into glue for a dipping spread.