Home > Products > Epoxy Glue > Epoxy Stick

Epoxy Stick

Brand : MAGPOW

Product origin : China

Delivery time : 25-35 DAYS

Supply capacity : 100 TON/MONTH

Article Number:MPA106
Specification: 57g/set,12sets/inner,12inners/ctn
Meas: 38.5*32.5*42.5cm

Feature: 
5 Minutes Epoxy Adhesive Cement is based on the room temperature, having the features of solidifying rapidly, high adhesive performances, and also doing quite well in the aspects of water-fasting, oil-resistant, weak acid-resistant, weak alkali-resistant, aging-resistant etc.  

Main Component: 
A component is the modified Epoxy Resin, mucus, B component is modified Sulfur Curing Agent and mucus.

Technical Feature: 

Name Of Product

Item Code

Appearance

Solidifying Speed(25℃,3-5g)

Solidifying Speed

(25℃,3-5g)

Hardness

Shear Strength (25℃×48h,Steel-Steel)

5 Minutes Epoxy Adhesive Cement

SK-123

 A component is the white even rubber pulpy; B component is the gray to the cinereus rubber pulpy

3-5 Min

10-30

Mins

80-85 shore D

≥8MPa


Scope Of Application: 
5 Minutes Epoxy Adhesive Cement is suitable in material and so on metal, ceramics, stone material, concrete, glass fast cementations, patching and stops up leaks the seal.Mainly uses in the pipeline dripping of a water clock, sanitary equipment breakage patching and the peripheral seal, swims the pond, the roof, the bathroom, the basement leakage, the balcony seal, the solar energy installment, casting patching, the cultural relic repair and maintenance, the utensil anticorrosion protection, the estate management, the construction and installation, the project service, the thick thin pipeline connection modelling, the pattern making and so on..


Using Method:  
1.Clean and dry the surface after getting rid of the oil, dirty, rust.  If the surface is smooth, it is required to make the surface to be rough firstly, then clean and dry. 
2.For usage of glue cement, adjust the glue A and B according to the component rate as 1:1. Then, mix them to be single color by agitating evenly.  For usage of glue sticks, please cut a proper quantity, temper it to be even and single color.  The operation should be completed within 3-5 minutes after mixing evenly.  During the operation, please press the glue hardly and strictly on the adhesive surface.  The glue would stiffen as hard as steel after one hour.  Then, go on polishing, planning, drilling, painting or machining.  24 hours later, the glue would achieve the max intensity.  

Warning:         
1.5 Minutes Epoxy Adhesive Cement must be even enough for the mixing of the two components during the adjusting of the glue.  Do not use the rest glue for the second time. 
2.Clean hands with a cloth dipped by alcohol, then wash hands with warm water and soap before solidifying if hands have touched the glues.
3.If application in winter, please heat the glue and surfaces to be bonded till the temperature arrives at room one, i.e. 23±2℃.
4.Take strict precautions against touching by the kids and entering into the mouth.
Go to hospital at once if the glue is eat into mouth carelessly.  And wash the eyes for 15 minutes with water if eyes touch the glues, see the doctor for the serious situation.    

Storage And Packing: 
1.Stock the products with air-tight seal in the environment of shade and dry.  The shelf life is one year.  It is available to use based on passing of the test if being beyond the shelf life.   
2.Preserve and transport as non dangerous products. 



Please feel free to give your inquiry in the form below.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :
    Message